Search
Close this search box.
EN

Glossary Terms​

Alternate Set Teeth (AST) refer to a tooth pattern on band saw blades where teeth are set in alternating directions. This configuration enhances cutting efficiency by providing effective chip removal and reducing heat generation, resulting in a smoother cut and… Read more

An arbor is the spindle or shaft on a mill drill machine or band saw that holds and rotates the cutting tool or blade. It plays a crucial role in maintaining accuracy and stability during the cutting process, ensuring proper… Read more

Ball bearings are precision components used in various machines, including band saws and mill drill machines, to reduce friction, support loads, and enable smooth rotation of parts. They consist of small spherical balls enclosed between two concentric rings, facilitating the… Read more

A band saw is a power-driven cutting tool that uses a continuous loop of toothed metal blade to make precise cuts in various materials such as wood, metal, and plastic. The blade is stretched between two or more wheels, allowing… Read more

The band saw base is the foundation or frame of a band saw that supports and stabilizes the machine during operation. It is typically made of sturdy materials such as cast iron or steel, providing rigidity and vibration resistance, ensuring… Read more

Beam strength refers to the ability of a band saw blade to resist bending and deflection forces during cutting. High beam strength is essential for maintaining accuracy, minimizing blade drift, and ensuring straight and precise cuts. Factors that influence beam… Read more

A belt tensioner is a mechanical device used in band saws and mill drill machines to maintain the proper tension on the drive belt, which connects the motor to the machine’s cutting tool or blade. Proper belt tension is crucial… Read more

Bi-Metal refers to bandsaw blades that are made from two different types of metal. Typically, they feature a high-speed steel edge for cutting and a flexible, durable backer made from another type of metal. Read more

A bimetal band saw is a type of band saw that utilizes a bimetal blade, which features two different metals joined together, typically high-speed steel (HSS) teeth bonded to a flexible, fatigue-resistant alloy backer. This combination provides the blade with… Read more

A bimetal blade is a type of band saw blade that consists of two distinct metals joined together. The cutting edge is made from high-speed steel (HSS) for increased hardness and wear resistance, while the backer is made from a… Read more

The blade back is the non-cutting, rounded edge of a band saw blade, opposite the toothed cutting edge. It provides support and stability to the blade during cutting, helping to minimize deflection and improve cutting accuracy. Blade backs can be… Read more

Blade break-in is the process of gradually conditioning a new band saw blade by starting with a lower feed rate and speed, allowing the blade to wear evenly and establish a proper cutting edge. This process helps extend the blade… Read more

Blade deflection refers to the bending or deviation of a band saw blade from its intended cutting path during operation. Excessive deflection can lead to inaccurate cuts, poor surface finish, and increased blade wear. Factors that can contribute to blade… Read more

Blade drift is the tendency of a band saw blade to move away from its intended cutting line during operation. This can result in inaccurate cuts and poor workpiece finish. Factors that can contribute to blade drift include blade tension,… Read more

Blade geometry refers to the shape, size, and arrangement of the teeth on a band saw blade, as well as the blade’s thickness and width. The geometry of a blade directly affects its cutting performance, durability, and the types of… Read more

A blade guard is a safety feature on band saws designed to cover the exposed portions of the blade when not in use or during cutting, protecting the operator from accidental contact with the sharp, moving blade. Blade guards also… Read more

Blade guides are components on band saws that support and stabilize the blade during cutting, helping to maintain accurate and consistent cuts. Guides can be made of various materials, such as steel, ceramic, or bearing-based designs, and are typically adjustable… Read more

Blade Material refers to the substance from which the blade of a bandsaw or milling machine is made. Common materials include high-speed steel, carbide, and bi-metal, each offering different performance characteristics. Read more

Blade pitch, also known as tooth spacing or tooth pitch, refers to the distance between the points of adjacent teeth on a band saw blade. It is usually measured in teeth per inch (TPI) or millimeters per tooth. The blade… Read more

Blade speed refers to the rate at which a band saw blade moves around the wheels during operation, typically measured in surface feet per minute (SFPM) or meters per minute (m/min). The appropriate blade speed depends on the material being… Read more

Blade tension is the force applied to a band saw blade to keep it taut and properly aligned between the wheels during operation. Adequate tension is critical for maintaining blade stability, minimizing deflection, and ensuring accurate cuts. Blade tension can… Read more

Blade tooth hardness refers to the hardness of the teeth on a band saw blade, which directly affects the blade’s cutting performance, durability, and the types of materials it can effectively cut. Blades with higher tooth hardness, such as those… Read more

Blade tracking refers to the alignment and positioning of a band saw blade on the wheels during operation. Proper tracking ensures that the blade remains centered on the wheels, reducing the risk of blade slippage or breakage, and improving cutting… Read more

A blade welder is a device used to join the ends of band saw blades by creating a strong, continuous weld, typically through a process called resistance welding. Blade welders allow operators to customize blade lengths or repair broken blades,… Read more

Blade width refers to the measurement of a band saw blade from the tip of the tooth to the back edge. The appropriate blade width depends on the type of cut being made and the material being cut. Wider blades… Read more

A butt weld is a type of weld used to join two band saw blade ends together by placing them edge-to-edge and fusing the material using heat, typically from an electric current in a blade welder. The resulting weld is… Read more

A carbide blade is a type of band saw blade featuring teeth made from solid carbide, a material that is significantly harder and more wear-resistant than high-speed steel (HSS) or carbon steel. Carbide blades are ideal for cutting hard materials,… Read more

A carbide-tipped blade is a type of band saw blade with teeth that have a carbide tip brazed onto a steel body. These blades combine the cutting performance and wear resistance of carbide with the flexibility and lower cost of… Read more

A carbon band saw blade is a type of band saw blade made from carbon steel, offering a balance between flexibility and durability. These blades are ideal for general-purpose cutting applications, such as woodworking, non-ferrous metal cutting, and plastic cutting.… Read more

A carbon steel blade is a type of band saw blade made from carbon steel, which is characterized by its flexibility, affordability, and ease of sharpening. Carbon steel blades are suitable for cutting a variety of materials, including wood, plastics,… Read more

A cast iron frame is a type of band saw frame made from cast iron, a strong and rigid material known for its excellent vibration-damping properties. Cast iron frames provide superior stability and support for the band saw, helping to… Read more

A chip brush is a component found on some band saws, designed to remove chips and debris from the blade during operation. The brush typically consists of stiff bristles that make contact with the blade teeth, dislodging chips and helping… Read more

Chip load is a term used to describe the amount of material removed by each tooth on a band saw blade during cutting. It is typically measured in inches or millimeters per tooth. The optimal chip load depends on factors… Read more

Chip removal is the process of clearing away chips and debris generated during the cutting operation on a band saw or mill drill machine. Efficient chip removal is essential for maintaining cutting performance, preventing blade overheating, and reducing the risk… Read more

A clamping vise is a device used on band saws and mill drill machines to securely hold and position workpieces during cutting operations. Clamping vises typically consist of two jaws that can be adjusted to accommodate various workpiece sizes and… Read more

Clearance refers to the space or distance provided between the cutting tool and the workpiece or between different parts of the machine, to prevent unwanted contact or collision. Read more

The clearance angle, also known as the relief angle, is the angle between the back edge of a band saw tooth and the trailing edge of the material being cut. This angle allows the tooth to clear the material as… Read more

A column is a vertical structural component in band saws and mill drill machines, often made of cast iron or steel, that provides support and rigidity to the machine. In a band saw, the column connects the base to the… Read more

A column band saw is a type of band saw that features a vertical column support structure, providing stability and rigidity to the machine. Column band saws are commonly used for industrial applications, where they are known for their high… Read more

A combination tooth is a type of tooth configuration found on band saw blades, characterized by a pattern that alternates between different tooth geometries, such as regular, hook, and skip teeth. Combination tooth blades offer a balance of cutting speed,… Read more

Constant pitch refers to a band saw blade tooth configuration where the distance between adjacent teeth, or tooth pitch, remains uniform along the entire length of the blade. Constant pitch blades are suitable for cutting materials with uniform hardness and… Read more

A contour band saw is a type of band saw specifically designed for making intricate, curved cuts in various materials, such as wood, metal, and plastics. These saws typically feature a smaller blade width and more flexible blade to facilitate… Read more

Contour cutting is the process of cutting intricate curves, shapes, and patterns in materials using a band saw or other cutting tool. This cutting technique requires a flexible blade, precise control, and, in some cases, specialized equipment like a contour… Read more

Coolant is a fluid used in cutting operations, such as those performed on band saws and mill drill machines, to reduce friction, dissipate heat, and remove chips and debris from the cutting area. Coolants can be water-based, oil-based, or synthetic,… Read more

A coolant pump is a device used in band saws and mill drill machines to circulate coolant from a reservoir to the cutting area, where it helps reduce friction, dissipate heat, and remove chips and debris. Coolant pumps can be… Read more

A coolant reservoir is a container or tank used to store coolant in band saws and mill drill machines. The reservoir typically connects to a coolant pump, which circulates the fluid to the cutting area during operation. Coolant reservoirs can… Read more

A coping saw is a type of hand-held saw featuring a thin, flexible blade that is held in tension by a U-shaped frame. Coping saws are designed for making precise, intricate cuts in wood, particularly in tight curves or corners.… Read more

A crosscut blade is a type of band saw blade or circular saw blade designed specifically for making crosscuts, which are cuts made across the grain of wood or other materials. Crosscut blades typically feature a higher tooth count and… Read more

Cutter Deflection is the deviation of the cutting tool from its intended path due to the forces applied during the cutting process. It can cause inaccuracies in the finished workpiece and wear on the tool. Read more

Cutting force is the amount of force or pressure applied by a cutting tool, such as a band saw blade or mill drill bit, during the cutting process. The cutting force depends on factors like material properties, blade or tool… Read more

A cutting lubricant is a fluid or compound applied to the cutting area during machining operations, such as band saw cutting or milling, to reduce friction, dissipate heat, and facilitate chip removal. Cutting lubricants can be oil-based, water-based, or synthetic,… Read more

Cutting rate is a measure of the amount of material removed by a cutting tool per unit of time, typically expressed in inches or millimeters per minute. The cutting rate depends on factors such as material properties, tool geometry, cutting… Read more

Cutting speed is the linear speed at which a cutting tool, such as a band saw blade or mill drill bit, moves through the material being cut. Cutting speed is typically measured in surface feet per minute (SFM) or meters… Read more

A DC motor (Direct Current motor) is a type of electric motor that converts direct current electrical energy into mechanical energy. DC motors are commonly used in band saws, mill drill machines, and other power tools due to their simplicity,… Read more

A double miter band saw is a type of band saw designed to make precise miter cuts in two planes, allowing for angled cuts both horizontally and vertically. Double miter band saws typically feature a tilting table or head, adjustable… Read more

Downfeed is the controlled movement of a band saw blade or mill drill bit towards the workpiece during cutting, typically measured in inches or millimeters per minute. Proper downfeed control is essential for maintaining cutting accuracy, preventing tool or workpiece… Read more

A drive belt is a flexible, continuous band used to transmit power from a motor to the drive wheel in band saws or other power tools. Drive belts can be made of rubber, leather, or synthetic materials, and may feature… Read more

A drive wheel is the primary wheel in a band saw that is connected to the motor and transmits power to the band saw blade. The drive wheel is typically larger than the idler wheel and may be rubber-coated or… Read more

Feed rate is the rate at which a cutting tool, such as a band saw blade or mill drill bit, advances into the workpiece during the cutting process. Feed rate is typically measured in inches or millimeters per minute and… Read more

The Feedrate is the speed at which the workpiece is fed into the cutting tool or the tool is moved across the workpiece. It’s often measured in inches per minute (IPM) or millimeters per minute (mm/min). Read more

A fence scale is a measuring device, usually in the form of a graduated scale or ruler, attached to the fence of a band saw, mill drill, or other cutting tool. The fence scale allows the user to accurately position… Read more

A guide post is a vertical component in a band saw that supports and adjusts the position of the blade guides relative to the workpiece. Guide posts can be manually or automatically adjusted, allowing the user to set the proper… Read more

A guide rail is a linear guide system used in band saws, mill drill machines, or other cutting tools to provide support and accurate guidance for the cutting tool or workpiece. Guide rails can be made from various materials, such… Read more

A gullet is the curved space between the teeth of a band saw blade or other cutting tool, designed to provide clearance for chips and debris during the cutting process. The size and shape of the gullet depend on factors… Read more

A hook tooth is a type of tooth geometry found on band saw blades, characterized by a deep gullet, a positive rake angle, and large, widely spaced teeth. Hook tooth blades are designed for aggressive cutting and fast material removal… Read more

An idler wheel is a secondary wheel in a band saw that works in tandem with the drive wheel to support and maintain tension on the band saw blade. The idler wheel is typically smaller than the drive wheel and… Read more

Kerf refers to the width of the material removed during the cutting process by a cutting tool, such as a band saw blade or mill drill bit. The kerf width depends on factors like blade or tool geometry, cutting speed,… Read more

A locking handle is a mechanical device, often featuring a cam or lever action, used on band saws, mill drill machines, or other cutting tools to secure and adjust various components, such as fences, blade guides, or tables. Locking handles… Read more

The lower blade guide is a component in a band saw that supports and aligns the band saw blade below the table, near the bottom wheel. Lower blade guides can be made of various materials, such as steel, ceramic, or… Read more

A Metal Cutting Band saw (MCB) is a power tool designed specifically to cut through various types of metals. It uses a blade featuring a continuous band of metal with teeth along one edge to perform cuts. Read more

A Metal Cutting Bandsaw (MCB) is a power tool designed specifically to cut through various types of metals. It uses a blade featuring a continuous band of metal with teeth along one edge to perform cuts. Read more

A Milling Cutter is a cutting tool used in milling machines or machining centers to perform milling operations. It removes material from a workpiece by rotating and making repeated cuts along the surface. Read more

Milling Feed and Speed are two critical parameters in milling. Feed refers to the rate at which the workpiece is advanced into the cutter, while Speed refers to the rotational speed of the spindle and the cutting tool. Proper management… Read more

Miter cutting is the process of making angled cuts, typically across the width of a workpiece, using a band saw, miter saw, or other cutting tools. Miter cuts are commonly used in woodworking, metalworking, and construction applications to create joints,… Read more

A miter gauge is an accessory used with band saws, table saws, or other cutting tools to guide and position the workpiece during miter cutting. Miter gauges typically feature an adjustable protractor head, a fence, and a guide bar that… Read more

Morse taper is a standardized system of self-holding, self-releasing tapers used in machine tools, such as mill drill machines or lathes, to securely connect toolholders or workpieces to the spindle or arbor. The Morse taper system features a shallow, conical… Read more

A motor pulley is a wheel mounted on the motor shaft of a band saw, mill drill machine, or other power tool, designed to transmit rotational motion and torque to the drive wheel, cutting tool, or other machine components via… Read more

Pitch refers to the distance between the points of adjacent teeth on a cutting tool, such as a band saw blade or mill drill bit. In band saw blades, pitch is typically measured in teeth per inch (TPI) or points… Read more

A plain tooth, also known as a regular tooth or standard tooth, is a tooth geometry found on band saw blades, characterized by a straight, uniform profile, a 0-degree rake angle, and evenly spaced teeth. Plain tooth blades are designed… Read more

A power switch is an electrical component used in band saws, mill drill machines, and other power tools to control the flow of electrical current to the motor, enabling the user to turn the tool on or off. Power switches… Read more

Pulse Width Modulation (PWM) is a method used to control the amount of power delivered to an electronic device by altering the pulse width of the power signal. It’s often used in DC motor speed control. Read more

A quick-release lever is a mechanical device, often featuring a cam or lever action, used on band saws, mill drill machines, or other cutting tools to enable rapid, tool-free adjustment or disassembly of various components, such as blade tension, fences,… Read more

The Rake Angle is the angle at which the cutting edge of a tool is inclined away from the workpiece. It significantly influences chip formation and heat generation during cutting. Read more

A raker set is a tooth pattern used on band saw blades or other cutting tools, consisting of a repeating sequence of left-set, right-set, and unset (raker) teeth. The raker set pattern provides a balance between cutting speed and surface… Read more

Raker Set Teeth is a type of tooth set on a bandsaw blade where a pattern of three teeth is repeated: one tooth set left, one set right, and one unset or ‘raker’. This is typically used for wood cutting. Read more

A raker tooth is an unset tooth in a band saw blade or other cutting tools, which is part of a repeating tooth pattern called raker set, consisting of left-set, right-set, and raker teeth. Raker teeth help clear a wider… Read more

The relief angle, also known as the clearance angle, is the angle between the trailing edge of a cutting tool’s tooth (such as a band saw blade or mill drill bit) and the material being cut. This angle ensures that… Read more

Resawing is the process of cutting a workpiece along its thickness, essentially creating thinner, flat sections or veneers from a larger piece of material. This process is commonly performed using a band saw equipped with a wide, high-tension blade. Resawing… Read more

A rip blade is a type of band saw blade or circular saw blade specifically designed for making rip cuts, which are cuts made parallel to the grain of a workpiece, typically in wood. Rip blades typically feature a low… Read more

A rip fence is an adjustable guide used on band saws, table saws, or other cutting tools to help maintain a straight, consistent distance between the blade and the edge of the workpiece during rip cuts. The rip fence is… Read more

A riser block is an accessory used with band saws to increase the maximum cutting height or resaw capacity of the tool. Riser blocks are typically made of cast iron or steel and are installed between the upper and lower… Read more

A roller bearing is a type of bearing used in band saws, mill drill machines, or other machinery to reduce friction and support rotating components, such as shafts or spindles. Roller bearings consist of cylindrical rolling elements that move between… Read more

A saw blade is the cutting component of a saw, such as a band saw, table saw, or circular saw, designed to cut various materials like wood, metal, or plastic. Saw blades come in different materials, tooth geometries, and tooth… Read more

A scale indicator is a measurement device, typically consisting of a graduated scale and a pointer or digital readout, used on band saws, mill drill machines, or other cutting tools to provide accurate, real-time measurement of workpiece dimensions, cutting depth,… Read more

Scroll cutting is the process of cutting intricate, curved patterns and shapes in a workpiece, usually using a band saw or scroll saw. Scroll cutting requires a narrow, flexible blade and precise control over the cutting speed and workpiece feed… Read more

A skip tooth, also known as a skip-tooth blade, is a band saw blade tooth pattern characterized by widely spaced teeth and a shallow gullet. Skip tooth blades are designed for cutting soft, fibrous, or abrasive materials, such as wood,… Read more

Slab Milling is a milling operation that produces a flat surface parallel to the axis of rotation of the cutting tool. It is performed on the outer face of the workpiece and is often the first step in the milling… Read more

The Spindle is the part of the machine that holds and drives the cutting tool. In milling machines and bandsaws, the spindle rotates the tool at varying speeds for cutting, drilling, or milling. Read more

Spindle Speed refers to the rotational speed of the spindle and the mounted cutting tool. It’s typically measured in revolutions per minute (RPM), and it directly influences the cutting speed and finish of the workpiece. Read more

Spring steel is a high-carbon, low-alloy steel with excellent toughness, strength, and elastic properties, making it suitable for manufacturing band saw blades, springs, or other components that require high stress resistance and the ability to return to their original shape… Read more

Stellite is a family of cobalt-chromium alloys known for their excellent wear resistance, corrosion resistance, and high-temperature stability. Stellite is commonly used to manufacture band saw blade teeth or cutting tool inserts, particularly for cutting hard or abrasive materials, such… Read more

Stepless refers to a type of control or adjustment that allows for continuous, rather than incremental, change. In bandsaws and milling machines, it often describes speed control which can be set at any value within a range. Read more

A straight set, also known as unset or neutral set, is a tooth pattern used on band saw blades or other cutting tools, where the teeth are neither left-set nor right-set, remaining in line with the blade’s body. Straight set… Read more

Surface Milling is a machining process where a rotating cutter removes material from the surface of a workpiece to create a flat or contoured surface. It is a common operation in milling drilling machines. Read more

A swage set is a tooth pattern used on band saw blades or other cutting tools, in which the teeth are shaped and set by a swaging process. This process involves deforming the tooth material to create the desired tooth… Read more

A table insert is a replaceable component, typically made of plastic, metal, or wood, that fits into the opening or throat of a band saw or other cutting tool’s table. The table insert provides a flat, stable surface around the… Read more

A table tilt lock is a locking mechanism used on band saw or other cutting tool tables, designed to securely hold the table in a desired tilt angle during angled or bevel cuts. The table tilt lock typically consists of… Read more

A table trunnion is a support component used on band saw or other cutting tool tables, which connects the table to the saw’s frame or base and allows for tilting or pivoting movement. The trunnion is typically made of cast… Read more

Teeth Per Inch (TPI) refers to the number of teeth present in one inch of a bandsaw blade. The TPI determines the speed and type of cut, with a higher TPI producing a slower, smoother cut. Read more

Tension, in the context of band saw blades or other cutting tools, refers to the force applied to the blade to maintain its proper shape and alignment during cutting operations. Proper blade tension is crucial for ensuring accurate, consistent cutting… Read more

Throat depth, also known as cutting depth or cutting capacity, is the distance from the band saw blade or other cutting tool’s teeth to the back or inner edge of the frame, determining the maximum width of the workpiece that… Read more

A thrust bearing is a type of bearing used in band saws or other cutting tools to support axial or thrust loads, such as the force exerted on the blade during cutting operations. Thrust bearings are typically installed behind the… Read more

The tooth face is the front surface of a band saw blade tooth or other cutting tool, which engages with the workpiece during the cutting process. The tooth face’s shape, angle, and material play a critical role in determining the… Read more

Tooth Pitch refers to the distance from the point of one tooth to the point of the next on a bandsaw or milling machine blade. It impacts the smoothness of the cut and the speed of the cutting process. Read more

The tooth point is the tip of a band saw blade tooth or other cutting tool, where the tooth face and the tooth back meet. Tooth points are responsible for initiating the cutting action, penetrating the workpiece material, and guiding… Read more

The tooth rake angle, also known as the tooth cutting angle or attack angle, is the angle between the tooth face of a band saw blade or other cutting tool and an imaginary line perpendicular to the blade’s body. The… Read more

Tooth Set refers to the pattern in which the teeth on a bandsaw blade are bent, or “set”. This affects the width of the cut and the clearing of waste material from the cut. Read more

Torque is a measure of the force that can cause an object to rotate about an axis. In bandsaws and milling drilling machines, the torque produced by the motor affects the cutting power. Read more

Teeth Per Inch (TPI) refers to the number of teeth present in one inch of a bandsaw blade. The TPI determines the speed and type of cut, with a higher TPI producing a slower, smoother cut. Read more

A trunnion bracket is a support component used in band saws or other cutting tools, connecting the table trunnion to the tool’s frame or base. The trunnion bracket ensures the stable and precise positioning of the table during cutting operations,… Read more

The upper blade guide is a component used in band saws to support and guide the blade during cutting operations, maintaining proper blade alignment and reducing blade deflection. The upper blade guide is typically adjustable, allowing the user to position… Read more

The upper wheel cover is a protective component used in band saws to enclose the upper drive wheel, preventing accidental contact with the moving wheel and blade during operation. The upper wheel cover is typically made of metal, plastic, or… Read more

A V-belt is a type of drive belt used in band saws and other machinery to transfer power from the motor to the drive wheel or other components. V-belts are characterized by their trapezoidal cross-section, which allows for increased contact… Read more

Variable Group Set Teeth (VGST) is a configuration on a bandsaw blade where the number of teeth per inch varies along the blade. VGST provides a balance between fast cutting and smooth finishes. Read more

Variable pitch refers to a band saw blade or other cutting tool with teeth that have varying spacing, or pitch, along the blade’s length. Variable pitch blades provide a smoother cutting action, reduced vibration, and improved surface finish compared to… Read more

A vertical band saw is a type of band saw with a vertically-oriented blade, typically used for cutting irregular shapes, curves, and contours in various materials, such as wood, metal, or plastic. Vertical band saws often feature adjustable worktables, blade… Read more

Wave Set Teeth refers to a setting of teeth on a bandsaw blade where each tooth is set in a wave-like or sinusoidal pattern. This pattern is used for cutting thin, soft materials like sheet metal. Read more

A wheel brush is a component used in band saws to clean the drive wheels, removing debris, dust, or accumulated sawdust from the wheel surfaces during operation. Wheel brushes help maintain proper wheel traction, prevent slippage, and ensure consistent blade… Read more

Wheel diameter refers to the size of the drive and idler wheels used in a band saw or other cutting tool. The wheel diameter determines the maximum blade length and cutting capacity of the tool, as larger wheels can accommodate… Read more

A wheel guard is a protective component used in band saws to enclose the drive and idler wheels, preventing accidental contact with the moving wheels and blade during operation. Wheel guards are typically made of metal, plastic, or other durable… Read more

Wheel width refers to the size of the drive and idler wheels’ face or contact area used in a band saw or other cutting tool. The wheel width affects the blade’s stability, alignment, and support during cutting operations. Wider wheels… Read more

A Workpiece refers to the item that is being cut, drilled, or otherwise worked on by a bandsaw or milling machine. It can be made from various materials including wood, metal, or plastic. Read more

A worktable is the flat, stable surface provided on a band saw or other cutting tool to support the workpiece during cutting operations. Worktables can be made of various materials, such as cast iron, steel, or aluminum, and may include… Read more

A worm gear is a type of gear used in band saws or other machinery to transfer power or motion between non-parallel, non-intersecting shafts, typically at a 90-degree angle. Worm gears consist of a worm, which is a threaded shaft… Read more

A zero clearance insert, also known as a throat plate, is an accessory used in band saws and other cutting tools to replace the standard insert surrounding the blade in the worktable. Zero clearance inserts are custom-made or adjustable to… Read more