(250NA/330NA/335A series)

(battery)

Hydraulic vise system for optimal clamping of different sized workpieces.

High Efficiency Motor Available(712G/712GDR/812G/812GDR/912G)

(1/2” 5/8”)

(730×210)(820×240)(Ø100/115/120m/m)(for RF31/40)

(for cross table only) (110V only) This power table feed can be installed on rongfu mill/drill machines for conveniently feeding the workpiece.

A digital position readout (also known as a DRO, short for digital read out) provides a numerical display showing the position of your machine elements. On a milling machine a 3-axis

Available with different inch/metric size for your selection.

Tapping function for more operation convenience.

Available with different inch/metric size for your selection.

This angle vise can clamp the workpiece with preferred angles and is very easy to use.

(w/ Limit Switch Or w/o Limit Switch ) The guard can protect operator from flying chips during working.

(10 liter)(1/8HP) Suitable for Rongfu drill presses, mill/drill machines , bandsaws , & Milling machines.

(M2423019S-1 for RF25/31/40/45) (M501051-1 for RF35)

Suitable for our complete range of band saws, please refer to the chart for the height and maximum load you need.